Here is everything you must know about Radon Mitigation!


Radon is a gas that occurs naturally outdoors in harmless amounts. It’s produced from the breakdown of uranium in soil and rocks. It can get concentrated in houses built on soil with natural uranium deposits. It gets into buildings through cracks in walls, floors, gaps in foundations, wires, or pumps.

The highest radon level is usually in the basement or crawl space. When inhaled, radon gas goes straight into the lungs, exposing them to small amounts of radiation.

There is a higher risk for those who lived in a house contaminated with radon for several years.

Radon mitigation process

You can test your home with radon testing systems in Utah. If you have a high radon level in your home, a team can install a

radon air mitigation system for you in Utah. A professional can install a mitigation system in a day at affordable rates. These mitigation systems will significantly reduce radon levels to below 2.7, and in most cases, radon removal systems will keep a house at 1.0pCi/L.

The radon system creates ventilation in the soil beneath the foundation. The suction provided by a specialty radon fan takes the radon and other soil gasses through a series of pipes and exhausts them out of the house.

The radon mitigation process reduces radon gas concentrations in the breathing parts of occupied buildings or water supply areas. Radon significantly contributes to environmental radioactivity.

Radon reduction systems can reduce radon levels by up to ninety-nine percent. Many people have reduced radon levels in their homes through this mitigation process.

Cost of radon mitigation system

Radon detection and mitigation in Utah costs vary depending on how the house is constructed. Radon system costs can range from $750 to $5,000 for each home. The average cost range for installing a radon mitigation system in an average home is between $1,100 and $2,500, with $1,400 being the average.

Factors that affect radon mitigation system prices

The price of a radon system depends on several factors. Some factors have affected the price a little, while others have a bigger effect on prices. Here are some of the factors that go into the cost of radon mitigation:
  • Foundation of the house.
  • Older homes are more difficult to fix.
  • Size of the homes larger than 4,000sq. Ft.
  • Type of roofing materials used.
  • The type of foundation used, especially if it’s cinder or block.
  • If the skeletal system is well installed, it will reduce your price.
  • Tall buildings may require special ladders or lifts, attracting extra costs.
  • A dirt crawl space needs special sealing, and this attracts extra fees.
  • Some Home Owners Association can be difficult to work with.
  • Too many floor cracks in the basement can require additional seals, which attracts additional costs.


The Environmental Protection Agency recommends using a certified radon mitigation contractor for your radon problems. To determine a service provider’s eligibility to mitigate your home, check with the state radon office because most states make license a requirement for professionals. Therefore, most states can provide you with a list of qualified radon mitigation providers.

Leave a Response