BusinessHome Based BusinessHome ImprovementReal Estate

Importance of Basic Concrete Floor Care and Cleaning

concrete floor cleaning in North Carolina

When you hear the term “concrete,” you usually think of the strong walls of a house or a skyscraper. Concrete, on the other hand, is an excellent material for both outdoor and interior flooring. Concrete floors are not only long-lasting, but they are also low-maintenance if properly sealed. Concrete flooring that has been treated is almost resistant to dirt, damage, stains, and spills.

A few other benefits of sealed concrete floors include:

  • There are no gaps, grout lines, or seams where dirt might become trapped.
  • Pet-friendly.
  • Water- and scratch-resistant.
  • Depending on the sealant applied, it can last for 3 to 10 years.

Concrete floor cleaning in Florida is also extremely fashionable, particularly when utilized in industrial or minimalistic environments. They are, indeed, the floors that have it all.

Basic Concrete Floor Care

Of course, even though concrete is an exceptionally durable flooring material, it still needs regular maintenance from a reputable concrete floor cleaning service to remain brand new for years. Fortunately, all you need to care for concrete floors are a few simple tools and a few simple actions.

To begin, sweep or dry mop interior concrete floors regularly to eliminate dust and debris. If there are oily spills or dirt that cannot be brushed away, use a pH-neutral cleaner to damp-mop. Furthermore, keep in mind that even sealed concrete can stain, so be sure to clean or mop up spills as soon as possible.

Nonetheless, if your concrete floors have deep-seated filth and look a little dull, you may need to hire a reputable professional cleaner to return them to their former brilliance.

Cleaning Sealed Concrete Floors

Among all forms of concrete flooring, treated or sealed concrete is the simplest to clean. This type of flooring is popular in offices because it is low-maintenance, stain-resistant, and can endure thousands of footsteps.

A broom, dust mop, or vacuum cleaner; a wet mop; and a mild, non-acidic, non-abrasive cleanser are required to clean sealed concrete floors so that the sealant does not break down or dull prematurely. If you don’t want to buy a specialized cleaner, you can use dishwashing liquid or Castile soap instead.

To commence, use your preferred method to remove dust and debris from the surface. This will assist in avoiding scratches, especially if your flooring is polished concrete. You may begin mopping when you have removed all of the gritty particles. Take your favorite cleanser and combine the recommended quantity (approximately two teaspoons if you use dishwashing liquid or Castile soap).

Mop the floor with this solution, then rinse with clean water and allow it to air dry. Sweep or vacuum the floor every day and mop at least once a week; the time between mopping can be greater if the floor is rarely used.

Cleaning Unsealed Concrete Floors or Exterior Concrete

You’ll need a garden hose or a large bucket to clean unsealed concrete, commonly used for patios and another outdoor flooring; a heavy-duty vacuum, or a broom or brush with stiff bristles; trisodium phosphate; and your preferred stain remover. The work will be much easier if you have access to a pressure washer.

The first step, like with interior concrete floors, is to remove dirt and debris. For this, use a stiff-bristled broom or brush or a high-powered vacuum. Then, wash the floor with the appropriate amount of trisodium phosphate and water. You achieve the best results; make sure to follow the recommendations on the trisodium phosphate.

If you don’t have a power washer, you may wet the concrete with a garden hose and then scrub it with the stiff-bristled brush from earlier to work the trisodium phosphate into the concrete. After that, carefully rinse and air dry.

To remove certain stains, follow the corresponding instructions below:

Tire marks: A degreaser, often found in garages, may be used to erase tire impressions from concrete. Allow it to rest for 4 to 5 hours before properly washing.

Grease and oil: To remove grease and oil stains from unprotected concrete, use a heavy-duty degreaser. To absorb the grease, you may also add some cornstarch or even cat litter. Depending on how deep the grease went, this may take three to five days. After that, use a vacuum cleaner to remove the particles for the proper concrete floor cleaning in North Carolina.